Ricmedia PC Help

Tech Guides for Everyone

Setup private VPN network or VPN service provider – complete guide

Setup private VPN network or VPN service provider – complete guide

I originally published this guide on it’s own website called “American Netflix Guide” to show you how to get the American version of Netflix, but all the steps can also be used to setup your own private VPN network, or even a VPN service provider.

If you see anything named “*netflix*” you can replace it if you know what you’re doing, otherwise just leave it until you’re more comfortable with setting up VPN servers (hostnames and TAP adapters especially). I suggest you set aside 2 hours for this tutorial and make sure you have a credit card handy for the cloud server you’ll need to purchase ($5 per month).

Contents

  1. Introduction, Preparation
  2. Choose a Cloud Server Provider & Initial Server Setup
  3. Install SoftEther
  4. Setup SoftEther
  5. Setup OpenVPN & SSTP
  6. Install & Setup dnsmasq, Setup IPTables
  7. Connecting to your VPN server, Summary

Introduction

Overview

We will be setting up a Debian Linux x64 cloud server and installing the excellent SoftEther VPN Server for VPN client access. We will also install dnsmasq for DHCP IP address allocation and finish the server by setting up basic IP Table firewall rules for security. Then we will install the SoftEther Server Admin software on your Windows PC to setup SoftEther Server and create user(s), then we move on to connecting your client PC to the VPN.

Get American Netflix Guide - SoftEther Server Administration Interface
SoftEther Server Admin Interface

Protocols

You will have a choice of 4 different VPN protocols; L2TP/IPSec, SoftEther SSL-VPN, OpenVPN and SSTP with the first two protocols working out-of-the-box, whereas the second two protocols will need some extra configuration (optional). I recommend L2TP/IPSec for Windows and MAC as they both have in-built clients for that protocol. For Linux I recommend SoftEther-SSL-VPN or OpenVPN.

Guide Format

The guide consists of text and images because as some people learn better visually, while others learn better with textual information. Each step is carefully written to make this guide accessible to everyone no matter what your skill level, therefore those of you with more experience can potentially skip over certain parts.

PuTTY Tips

Some very important tips before we get started. If you’re not familiar with the PuTTY SSH Client, it works a little differently in some regards, like when you highlight text inside it, it automatically copies it to your clipboard, you don’t need to right-click and copy as it’s already done.

Another aspect with PuTTY is when you want to paste text, all you need to do is move the cursor to the position you want (using the Arrow keys), then simply click your right mouse button once and it will paste the clipboard.

The PuTTY Interface
The PuTTY Interface

Preparation

Folders & Passwords

There are a few things we need to setup first to make this guide easier to use, the first is we need to create a project folder on your PC. Navigate to your Documents folder, then right-click inside it, choose New > Folder and name it VPNGuide and enter the new folder.

Right-click inside the folder, choose New > Text Document, name it info.txt, then click your mouse on the white space to save the file.

Now double-click on info.txt to open, then copy and paste the following text into it:

Visit RANDOM.org password generator, change password number to 5, then click the Get Passwords button which will generate 5 random passwords. Copy to clipboard the first password, then paste into the Cloud provider pass: field replacing [password], then repeat using the next generated password for each field that has [password].

Now we need to enter an email address for the Cloud provider email: field which can be your normal email address. For the SoftEther VPN client name: field type a username (usually your name ie. John).

Fill out your info.txt with generated passwords, a username and email address
Fill out your info.txt with generated passwords, a username and email address

Download & Install PuTTY SSH Client

Now we need to download probably the most widely used Windows utility ever, the PuTTY SSH Client. Click the following link to download the PuTTY SSH Client (choose 32bit if you’re unsure) and install as you would any other Windows application choosing Yes to “Create a desktop icon” option.

Download & Install SoftEther Server Manager

Now we want to download and install the SoftEther Server Manager for Windows (see screenshot below) and install as you would for any other application, leave everything at defaults.

Download SoftEther Server Managers for Windows

That finishes up our preparation so you can now move onto the next section Choose a Cloud Server Provider & Initial Server Setup.

Connect VPN using SoftEther SSL-VPN on Windows (all versions)

[youtube=https://youtu.be/ywwqnffd1d4]

In this guide I will show you how to connect your Windows (all versions) PC/laptop to any VPN service that’s using the SoftEther SSL-VPN protocol. SoftEther SSL-VPN is a very safe and easy VPN protocol to set up and can easily traverse firewalls making it a good choice for those of you who live in oppressive regimens.

Before we start the connection setup process, you will need to find out the following details (best have them written or printed). If you are connecting to a paid VPN service, just login and your details and settings will be there. If you are connecting via a workplace, please contact your Network Administrator and ask them for the following details:

Required Info

  • Your VPN username
  • Your VPN password
  • Server host name or IP address (ie. contoso.com or 192.101.23.309)
  • Desirable to know the Authentication type (RADIUS or standard)

Once you have this info you can then watch the video above or follow the text guide below.

Connect via SoftEther SSL-VPN on Windows

  1. Download the SoftEther Windows Client from http://www.softether-download.com/en.aspx?product=softether and choose (1) SoftEther VPN Client (2) Windows (3) Intel (x86 and x64)
  2. Once downloaded, find and right-click on it, choose Run as Administrator then click Yes to the security alert to allow the program to run
  3. Follow the installation instructions leaving everything at defaults
  4. Click on the Start icon Windows 10 Start Icon bottom-left of your screen and navigate to the SoftEther app and start it up
  5. Double click on Add VPN Connection, click Yes to add a new Virtual Network Adapter, leave the name at VPN and click OK (be patient as it can take a while to complete)
  6. Double click Add VPN Connection again, the New VPN Connection window will open
  7. For Setting Name: give it a descriptive name (ie. HomeVPN or WorkVPN)
  8. For Host Name: enter the server name or IP address (ie contoso.com or 182.167.23.101)
  9. Now click on Hub Name: and the app should automatically detect and display the name, if it doesn’t just enter VPN for this option
  10. Leave everything else at defaults (unless you have been given specific instructions to enter custom values)
  11. In the right hand side section, choose either Standard Password Authetication or RADIUS Authentication, if you’re unsure, try Standard first, if it doesn’t work try RADIUS
  12. Enter your VPN Username and Password into the respective fields
  13. Finally click OK to save and close the window
  14. You should now see your new connection, to connect, simply right-click on it and choose Connect, to disconnect, right-click on it and choose Disconnect
  15. SoftEther VPN Client will recommend you if the connection was successful or not. If unsuccessful, double-check all settings again or contact your VPN service provider or Network Administrator
  16. All done!

Connect VPN using L2TP/IPSec on Windows (all versions)

[youtube=https://youtu.be/c0eqR0Q7e6I]

In this guide I will show you how to connect your Windows (all versions) PC/laptop to any VPN service that’s using the L2TP/IPsec protocol. L2TP over IPsec is a relatively common and secure protocol and most VPN service providers and workplaces will support it.

Before we start the connection setup process, you will need to find out the following details (best have them written or printed). If you are connecting to a paid VPN service, just login and your details and settings will be there. If you are connecting via a workplace, please contact your Network Administrator and ask them for the following details:

Required Info

  • Your VPN username
  • Your VPN password
  • The server name or IP address (ie. contoso.com or 102.562.243.12)
  • The pre-shared key (PSK)
    (PSK will be a series of characters like a password)
  • Optional or required encryption
  • The password protocol (PAP, CHAP, MSCHAP or EAP)

Once you have this info you can then watch the video above or follow the text guide below.

Connect via L2TP/IPsec to VPN on Windows

  1. Click on the Start icon Windows 10 Start Icon bottom-left of your screen
  2. Inside the search box, type Control Panel, then click on the first result
  3. Click on Network and Internet, then click Network and Sharing Center
  4. Now click on Set up a new connection or network link
  5. In the window that opens, select Connect to a workplace, then click Next
  6. Click on Use my Internet connection (VPN)
  7. Enter the server name or IP address into the Internet address box
  8. Enter a unique name you will recognize, ie Contoso (Work) or HomeVPN
  9. Leave the Use smart card check box unchecked
  10. (Windows 8.1 & 10) Leave Remember my credentials checked
  11. Leave Allow other people to use this connection unchecked (unless you trust everyone using the computer)
  12. (Windows VISTA, 7) Check the Don’t connect now checkbox
  13. Now click on Create (the window will now close)
  14. On the left pane, click on Change adapter settings
  15. Look for your new connection, then right-click on it, and choose Properties
  16. In the Properties window, select the Security tab
  17. For Type of VPN select Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec)
  18. For Data encryption, select the encryption level your VPN service provider requires, if you’re unsure, select Require Encryption first, if you cannot connect, choose Optional Encryption
  19. For Authentication, select the method your VPN service provider requires, if you’re unsure, select Allow these protocols option, then check PAP, CHAP and MS-CHAP v2 check-boxes
  20. Now click the Advanced settings button, the Advanced Properties window will open
  21. Select the Use a pre-shared key for authentication option, then enter your pre-shared key, then click OK
  22. Finally click OK to close the Properties window
  23. For extra convenience, Right-click on your connection icon again and choose Create shortcut, choose Yes to the alert box. This will create a handy icon on your desktop.
  24. Now simply right-click on the connection icon and choose Connect/Disconnect
  25. Windows will tell you if the connection was successful
  26. If you have any errors or the connection was unsuccessful, double-check all settings or contact your VPN service provider or network administrator.
  27. All done!

Connect VPN using SSTP on Windows (all versions)

[youtube=https://youtu.be/tgfeRj8m7VM]

In this guide I will show you how to connect your Windows (all versions) PC/laptop to any VPN service that’s using the SSTP protocol. Secure Socket Tunneling Protocol is very secure and stable but only works on Windows computers. It can avoid firewalls because it runs over port 443 (SSL) which is rarely blocked because it’s used by all web browsers for secure browsing.

Before we start the connection setup process, you will need to find out the following details (best have them written or printed). If you are connecting to a paid VPN service, just login and your details and settings will be there. If you are connecting via a workplace, please contact your Network Administrator and ask them for the following details:

Required Info

  • Your VPN username
  • Your VPN password
  • The server name or IP address (ie. contoso.com or 102.562.243.12)
  • Optional or required encryption
  • The password protocol (PAP, CHAP, MSCHAP or EAP)

Once you have this info you can then watch the video above or follow the text guide below.

Connect via SSTP to VPN on Windows (all versions)

  1. Click on the Start icon Windows 10 Start Icon bottom-left of your screen
  2. Inside the search box, type Control Panel, then click on the first result
  3. Click on Network and Internet, then click Network and Sharing Center
  4. Now click on Set up a new connection or network link
  5. In the window that opens, select Connect to a workplace, then click Next
  6. Click on Use my Internet connection (VPN)
  7. Enter the server name or IP address into the Internet address box
  8. Enter a unique name you will recognize, ie Contoso (Work) or HomeVPN
  9. Leave the Use smart card check box unchecked
  10. (Windows 8.1 & 10) Leave Remember my credentials checked
  11. Leave Allow other people to use this connection unchecked (unless you trust everyone using the computer)
  12. (Windows VISTA, 7) Check the Don’t connect now checkbox
  13. Now click on Create (the window will now close)
  14. On the left pane, click on Change adapter settings
  15. Look for your new connection, then right-click on it, and choose Properties
  16. In the Properties window, select the Security tab
  17. For Type of VPN select Secure Socket Tunneling Protocol (SSTP)
  18. For Data encryption, select the encryption level your VPN service provider requires, if you’re unsure, select Require Encryption first, if you still cannot connect try Optional Encryption
  19. For Authentication, select the method your VPN service provider requires, if you’re unsure, select Allow these protocols option, then check PAP, CHAP and MS-CHAP v2 checkboxes
  20. Finally click OK to close the Properties window
  21. For extra convenience, Right-click on your connection icon again and choose Create shortcut, choose Yes to the alert box. This will create a handy icon on your desktop.
  22. Now simply right-click on the connection icon and choose Connect/Disconnect
  23. Windows will tell you if the connection was successful
  24. If you have any errors or the connection was unsuccessful, double-check all settings or contact your VPN service provider or network administrator.
  25. All done!
  26. NOTE* If you keep getting Error: 0x800B0109 see this guide

Connect VPN using OpenVPN on Windows (all versions)

[youtube=https://youtu.be/sBJvoNhjoBE]

In this guide I will show you how to connect your Windows (all versions) PC/laptop to any VPN service that’s using the OpenVPN protocol. The OpenVPN Protocol is a fast, secure and very stable protocol and most VPN service providers will support it.

Before we start the connection setup process, you will need to find out the following details (best have them written or printed). If you are connecting to a paid VPN service, just login and your details and settings will be there. If you are connecting via a workplace, please contact your Network Administrator and ask them for the following details:

Required Info

  • Your VPN username
  • Your VPN password
  • The OpenVPN configuration files (.ovpn) which will be available from your VPN service provider (you may need to login to your account to access the files) or network administrator.

Once you have this info you can then watch the video above or follow the text guide below.

Connect using OpenVPN to VPN on Windows

  1. Visit this link to download the OpenVPN Windows installer package https://openvpn.net/index.php/open-source/downloads.html
  2. Locate the downloaded program, right-click on it and choose Run as Administrator or choose to “Run” from your browser after it downloads
  3. Click Yes to allow the program to run, follow the app instructions to install
  4. Once the app is installed, download and find the OpenVPN configuration files from your VPN service provider (likely in a .zip folder) and unzip if necessary
  5. Enter the unzipped folder, then Ctrl + A to highlight all files, then Ctrl + C to copy
  6. Now enter the OpenVPN config folder, it will be located in C:\Program Files\OpenVPN\config
  7. Now Ctrl + V to paste the files into this folder, you may need to give Administrator permission for this, if so click Continue.
    NOTE* Windows VISTA & 7 users     you may need to alter file permissions on the config folder first, see this TechNet guide
  8. Now start the OpenVPN GUI app by going to Start Windows 10 Start Icon > All Programs > OpenVPN GUI
  9. Look for the OpenVPN taskbar icon as shown below and right-click on it (you may have to click the reveal arrow ^)
    OpenVPN Taskbar Icon
  10. You should now see either a single Connect item or multiple server locations, navigate to each and connect as required (see below)
    OpenVPN Connect Menu
  11. Once you click Connect, OpenVPN will attempt the connection and request your username and password so enter these as required
  12. OpenVPN will tell you if the connection was successful or not. For troubleshooting see this FAQ.
  13. All done!